WECO Polymer Fusion · Authorised Indonesia distributor
HDPE Butt Welding Machines
Butt welding, saddle fusion, fabrication and pipe saws — WECO's range, supplied and supported in Indonesia by PT. Super Tirta Teknologi.
Who we represent
WECO Polymer Fusion Australia
WECO Polymer Fusion Australia is an Australian polymer fusion equipment company. Its machines join PE and PP pipe for water, gas and industrial pipelines, and are used across Australia, Europe and the USA.
The range is built around the weld: pressure-cast aluminium frames, clamps 3 and 4 for tees, bends and manifolds, data-logger integration and a two-year manufacturer warranty. Every machine is CE certified.
PT. Super Tirta Teknologi is WECO's authorised distributor for Indonesia, supplying and supporting the range from Jakarta.
Key facts
- Company
- WECO Polymer Fusion Australia
- Base
- Melbourne, Australia
- Range
- Butt welding 50–2000 mm OD
- Warranty
- 2 years, manufacturer
- Certification
- CE
The range
Four ways to make the joint
Butt welding, saddle fusion, fabrication and pipe saws — one supplier for the machines, the tooling and the technical support behind them.
Butt Welding
Hydraulic and manual machines from 50 to 2000 mm OD, including low-force and Hydra Low Force models.
View machines
Saddle Fusion
Saddle welds onto new and existing mains: main 315–1200 mm, branch 63–630 mm.
View machines
Butt welding
Butt-welding models
| Model | Pipe range (OD) | Total power | Supply |
|---|---|---|---|
| WPF160 | 50–160 mm | 2.85 kW | 230 V / 1 ph |
| WPFM160 | 50–160 mm Manual | 1.75 kW | 230 V / 1 ph |
| WPF250 | 50–250 mm | 4.35 kW | 230 V / 1 ph |
| WPF315 | 90–315 mm | 5.35 kW | 230 V / 1 ph |
| WPF355 | 110–355 mm | 5.65 kW | 230 V / 1 ph |
| WPF450 | 200–450 mm 160 mm with SDR 9/11 modification | 9.5 kW | 400 V / 3 ph |
| WPF630 | 315–630 mm | 13.5 kW | 400 V / 3 ph |
| WPF800 | 450–800 mm 400 mm optional | 18.1 kW | 400 V / 3 ph |
| WPF1000 | 500–1000 mm | 28.8 kW | 400 V / 3 ph |
| WPF1200 | 630–1200 mm | 29 kW | 400 V / 3 ph |
| WPF1600 | 1000–1600 mm* | 66 kW | 400 V / 3 ph |
| WPF2000 | 1400–2000 mm Hydra Low Force | 93 kW | 400 V / 3 ph |
Manufacturer's published figures. Confirm the supply variant and voltage for your order. * WPF1600 range is from WECO's product description; their spec table repeats the 1200 mm figure. WPF1600 and WPF2000 are built to order.
Applications
Where the range works
The same machines are used in the trench, in the workshop and on the tie-in. If the pipe is PE or PP, there is a WECO configuration for it.
Why buy through STT
Local supply, local support
Authorised distributor
WECO's authorised distributor for Indonesia, with a direct line to the factory for specifications, spares and warranty.
Two-year warranty
Every machine carries WECO's two-year manufacturer warranty.
Technical advice
A team with 30+ years in polymer piping: material selection, SDR, weld procedures and site issues.
Operator training
Machine operation and data-logger training, on site or online, on request.
Spare parts and service
Heating plates, clamps, inserts and hydraulic spares, plus machine service support in Indonesia.
Local paperwork
Quotations, invoices and after-sales in Indonesian, with the import handled by STT.
Request a quote or book a demonstration
Tell us the pipe size, the material and the job — we will confirm the right model, the supply variant and the lead time.
Need a datasheet, a manual or a model that is not listed? Send us the model and pipe range and we will send the current documentation.
Manufacturer: WECO Polymer Fusion Australia
Product photography and icons: WECO Polymer Fusion Australia.